Great Planes T-Craft .20 Kit .20-.32 engine and a 56, wingspan is a high wing, aerobatic, clipped-wing T-Craft sport model airplane. This kit is great for the intermediate flier who has successfully mastered a sport low wing flying aircraft.
FEATURES:
- Easy-to-build, with CAD-engineered, precisely interlocking balsa and plywood construction
- Includes premium-quality hardware package
- Flies well using a 2-stroke .25 or 4-stroke .20, excellent aerobatic potential with a 2-stroke .32 or stroke .26
- Designed based on a full size clipped-wing Taylorcraft aircraft of the 1930s which was the predecessor to the classic Piper J-3 Cub
- Compact size is convenient to transport and well-suited for flying at small sites
- Any modeler with intermediate building experience can enjoy this kit
| INCLUDES: | All wood to build the kit |
| | Full size rolled plans |
| | Photo illustrated instruction manual with reference plans |
| | Clear windshield |
| | CA hinges |
| | Engine mount |
| | Hardware package |
| | Decal sheet |
| | 3-piece ABS cowl and 2-piece ABS wheel pants |
| | |
| REQUIRES: | Engine: .25-.32 (4-5.3cc)(2-stroke) or .26-.30 (4-stroke) |
| | Radio: 4 channel w/5 servos (3 standard and 2 micro for ailerons) |
| | Covering: approx. Two 6-foot rolls with matching paint |
| | Propeller |
| | 2.5, main wheels and 1, tailwheel |
| | 6oz fuel tank |
| | 1/4, foam rubber |
| | Fuel tubing |
| | Aluminun spinner nut |
| | 1/6 scale pilot |
| | 5/32, & 3/32, wheel collars |
| | 24, Servo lead extensions and Y-harness |
| | Building and field equipment |
| | |
| SPECS: | Wingspan: 56, (1422mm) |
| | Wing Area: 496.7 sq in (32.0 sq dm) |
| | Wing Loading: 17.5-21.0oz/sq ft (53.5-64.2g/sq dm) |
| | Weight: 3.75-4.5lbs (1705-2045g) prototype weight was around 3.75lbs |
| | Length: 40.75, (1035mm) |
| | Airfoil: NACA 23012, semi-symmetrical |
| | Center of Gravity: 3, Back from the Leading Edge of Wing at Fuselage |
| | Degrees incidence: |
| | Stabilizer: +2° |
| | Wing: +2° |
| | Engine: +3° up thrust, this is needed because the wing and stab are at a positive angle of attack. |
| | |
| Control Throws: | High Rate | Low Rate |
|---|
| Elevator: (EACH WAY) | 1/2, (12.7mm) | 5/16, (8mm) |
| Rudder: (EACH WAY) | 1, (25.4mm) | 1/2, (12.7mm) |
| Ailerons: (EACH WAY) | 5/8, (16mm) | 7/16, (11mm) |
| | |
| COMMENTS | Pilot figure shown in the picture on the box is Not included |
| | This airplane is not designed for electric power so there are no instructions concerning this. |
| Great Planes T-Craft .20 Manual |
