The HPI Racing 1/10 E10 Drift Falken 4WD is 2.4GHz radio-controlled, Ready-to-Run, electric powered drift car.
FEATURES:
- Chassis: Bathtub type 0.078" (2mm) thick with quick change battery holder and adjustable motor and radio equipment positions to easily convert from street/touring to drift driving with no extra parts to buy
- Drive: Four wheel shaft
- Shocks: Composite bodied
- Gearboxes: Closed
- Differentials: Front and rear bevel-type
- Transmission: Single-speed
- Radio: 2.4GHz 2-channel pistol grip
- Electronic Speed Control: SC-15WP with reverse
- Motor HPI Saturn 27T 540 size
- Charger: AC wall type
- Battery: HPI Plazma 7.2V 2000mAh NiMH with Standard connector
- Tires: Falken Azenis RT-615K T-drift
- 2.48" (63mm) diameter, 1.02" (26mm) wide
- Wheels: HRE, white center with chrome inner rim
- 2.08" (53mm) diameter, 1.02" (26mm) wide
- Bumpers: Front, foam
- Body: Pre-painted 2011 Ford Mustang GT with, adjustable body mounts to accomodate a large variety of touring car bodies
- Suspension: Full-time independent
- Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Steering: Bell-crank type with servo saver
| INCLUDES: | HPI E10 on-road 2011 Falken Tire Ford Mustang GT with painted body |
| | 2.4GHz radio |
| | Electronic Speed Control |
| | Battery |
| | Charger |
| | Wheels and Tires |
| | 27T motor |
| | Six AA batteries |
| | Instruction Manual |
| | |
| REQUIRES: | Misc. Items: Building and track equipment |
| | |
| SPECS: | VEHICLE; |
| | Length: 14.8" (375mm) |
| | Width, Adjustable: 7.32, 7.56, 7.80" (186, 192, 198mm) |
| | Height: 4.25" (107.95mm) |
| | Weight: 2.8 lbs (1270g) without body |
| | Wheelbase: 10" (255mm) |
| | Drive Ratio: 7.48:1 |
| | Tread: Front and rear 6.25" (158.75mm)(side-to-side at wheel centers) |
| | Front Track: 7.25" (184.15mm) |
| | Rear Track: 7.25" (184.15mm) |
| | Spur Gear: 65T |
| | Tires; Front and rear: 2.48" x 1.02" (63x26mm) |
| | BODY; |
| | Length: 18.5" (470mm) |
| | Width: 8" (203mm) at rear wheels (widest point) |
| | 7.5" (190.5mm) behind from wheels (thinnest point) |
| | Height: 4.25" (107.95mm) |
| | |
| HPI Racing 1/10 E10 Drift Falken 4WD Manual |
