O.S. FS-95V Ringed 4-Stroke Aircraft Engine
| INCLUDES: | O.S. Engines FS-95V Four Stroke Engine with Type F Glow Plug |
| | Muffler |
| | Header Pipe with two Locknuts |
| | Instruction Manual |
| | |
| REQUIRES: | Fuel: 5-20% nitromethane aircraft blend with 18% lubricant content |
| | Propeller: Sport & Aerobatic 13x7-9, 14x6-8 or Scale 15x6-8 |
| | |
| SPECS: | Carburetor Settings: |
| | Needle Valve: 2-1/2 - 3 turns from fully closed |
| | Mixture Control Valve: Rotate until slotted head is flush with carb body. After setting needle valve, rotate mixture control valve approximately 45¦ clockwise to lean the mixture or 45¦ counter-clockwise to richen mixture |
| | Displacement: 0.951cu in (15.59cc) |
| | Bore: 1.142" (29.0mm) |
| | Stroke: 0.929" (23.8mm) |
| | Practical RPM: 2,100 - 11,000RPM |
| | Power Output: 1.7ps/10,000RPM |
| | Weight: 20.88oz (592g) |
| | Muffler Weight: 2.05oz (58g) |
| | Crankshaft Size: 5/16-24 |
| | Height from bottom of Mounting Tab to Pushrod Cover: 3.8" (97.5mm) |
| | Height from bottom of Crankcase to Pushrod Cover: 4.7" (119mm) |
| | Distance from Carburetor to Drive Hub: 4.5" (115.7mm) |
| | Distance/Mounting Hole Centers Same Side: 0.98" (25mm) |
| | Distance/Mounting Hole Centers Opposite Side: 2" (52mm) |
| | Mounting Hole Diameter: 0.16" (4.2mm) |
| | Distance from Drive Hub to end of Crankshaft: 1.5" (37.4mm) |
| | Distance from Drive Hub to center of Engine: 2.6" (66.5mm) |
| | Width at Mounting Tabs: 2.4" (61mm) |
| | Width Below Mounting Tabs: 1.7" (42.6mm) |
|
| | Height/Mounting Tab Bottom to center of Needle Valve: 0.70" (17.8mm) |
| | |
| O.S. FS-95V Ringed 4-Stroke Aircraft Engine Manual |
| | |